Common solutions for: Troy-Bilt Lawn mower blades won’t engage If the PTO clutch is not getting power, if the clutch solenoid is defective, or if the clutch is worn out, the lawn mower blades will not engage The PTO clutch is not repairable—if the clutch is defective, you must replace it
Why won’t my mower blades stay engaged?
Why won’t my riding mower blades engage? Your riding mower blades won’t engage if the clutches are broken and the cable is damaged Additionally, if the deck belt is damaged, the pulley system is frozen, and the battery has a weak charge, the chances are that your riding mower blades won’t engage
Where is the PTO switch on a Troy Bilt riding mower?
The PTO lever, also known as the blade engagement lever, is located next to the driver’s seat on the right-hand side of the mower’s fender
What does the deck engagement cable do?
It is the cable that allows a user to engage and stop mower blades Over time the cable can get damaged or worn eventually breaking and requiring a replacement
How can you tell if your PTO switch is bad?
Activate the PTO clutch lever and look for the bulb to illuminate from the test light No illumination means the engagement switch has failed at the lever-switch position If the battery voltage reads correctly and the in-line fuse checks out, the lever switch will be the problem
How do you start a choke on a riding lawn mower?
How to Start a Riding Lawn Mower? Sit firmly on the seat Start the Engine Press the Brakes Engage the Parking Brake Put the Gear to Neutral Pull the Throttle onto Choke Position Insert the Ignition Key Turn the Key to the Right hand side/Clockwise
What is a PTO clutch?
Power take-off (PTO) clutches provide a mechanical disconnect between the power created by gas and diesel engines or electric motors to another piece of equipment The PTO clutches enable the transmission of that energy to auxiliary equipment that does not generate its own power
What is PTO blade engagement?
The PTO (Power Take Off) clutch provides a means of manually disconnecting the engine from the blades When the clutch solenoid is energized, the clutch engages the drive belt to drive the rotation of the lawn mower blades If the switch is defective, it may not supply power to the PTO clutch
Why does my PTO keep turning off?
@mattk ,Matt, Something as simple as a low battery/bad connection or not charging could cause this Possibly bad seat/reversing safety switch, faulty/loose wire/plug to clutch/PTO/switch, clutch faulty Trouble shooting/parts/manual links below may help
How does a mower PTO clutch work?
Driven by electricity provided by the mower’s 12-volt battery, the PTO clutch engages when its solenoid receives an electric spark The PTO pulley is attached to the clutch and guides the belt that connects to the engine crankshaft pulley and rotates the blades of the mower that are located under the mower’s deck
What would cause a riding lawn mower not to start?
There are many reasons a riding lawn mower won’t start—everything from stale gas to ignition switch problems If you constantly have to charge the battery, a bad battery or failed alternator could be causing the problem Lawn mower ignition switch problems can prevent the starter from getting current
Why is my lawn mower turning over but not starting?
The most common reason for a riding mower cranking over but not starting is bad gas, but other possible reasons include: Gas Valve Off No Gas Choke Fault
What is operator controlled mow in reverse?
If you shift into reverse before you press the RIO button, then the mower’s safety feature activates, and the engine shuts off to prevent reverse operation If this happens, you must switch to the ignition to the Off position, apply the brake, and restart the engine
How tight should a slip clutch be?
Tighten the bolts until the outer clutch spring, the cupped plate below the nuts, is tight against the spacer ring Once the spring is tight against the spacer ring, then torque the bolts to 40 to 45 ft/lbs All you are doing is torqueing the bolts so they stay tight
Where is the clutch on a riding lawn mower?
Power takeoff (PTO) clutches are found on riding lawn mowers These clutches exist on the bottom of the mower’s engine assembly and control the flow of power to the mower’s cutting blades
How do you raise a Troy-Bilt lawn mower?
How to Adjust the Height of Troy-Bilt Lawn Mowers Sit in the operators seat of the Troy-Bilt riding mower Locate the cutting height adjustment knob on the control panel directly under the front of the seat Turn the knob toward the “+” to raise the cutting height and toward the “-” to lower the cutting height
Where is the PTO clutch?
The PTO clutch is mounted under the tractor or mower beside the power drive shaft, which is also vertically aligned It is connected to the blade shaft, and when it spins, the blade spins too There is a belt that is attached to the drive shaft and PTO clutch pulley
Why does my Cub Cadet blades keep disengaging?
Sounds like the pto switch is going bad or the plug is loose I would unplug it clean it up and see what happens The switch is a little pricey but you can bypass it with a toggle switch That used to happen to my Cub Cadet 1515, but now it disengage even if I don’t hit a bump
What is PTO Cub Cadet?
The PTO (or power take-off) belt is part of a pulley system that operates the blades on your riding lawn mower It runs off the electric clutch system in your engine If you hear squealing during operation or see dry rot on your PTO belt, you may need to replace it
Why does my Cub Cadet keep shutting off?
The carburetor might be clogged A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time This sticky fuel can clog up the carburetor and cause the engine to stall If the carburetor is clogged, try cleaning it with carburetor cleaner
How does a PTO engage?
The PTO is engaged and disengaged using the main transmission clutch and a remote control mechanism which operates on the PTO itself Typically, an air valve is used to engage the PTO, but a mechanical linkage, electric or hydraulic mechanism are also options
How does the PTO electric clutch work on a Wheel Horse mower?
The PTO (Power Take Off) clutch provides a means of manually disconnecting the engine from the blades When the clutch solenoid is energized, the clutch engages the drive belt to drive the rotation of the lawn mower blades The PTO switch provides power to the PTO clutch
What does the PTO switch do?
The PTO is a switch or lever found on tractors and mowers and stands for Power Take Off This can be an electric switch or mechanical engagement that takes engine power to operate the mower deck or an implement