Use the correct procedure when mounting or dismounting a vehicle or forklift, you must have three points of contact – either two feet and one hand, or two hands and one foot and must be facing the lift truck Avoid Dismounting the vehicle when in motion Only dismount when it has come to a complete stop
How many points of contact should you maintain when dismounting a pit?
When mounting or dismounting equipment, maintain three points of contact with the access supports This means that at all times you have either two hands and one foot, or two feet and one hand in contact with a support
When mounting and dismounting a forklift you should?
When mounting or dismounting a forklift, always: Face the vehicle Never jump off Use a three-point stance (always have both hands and one foot or vice-versa in contact with the unit) Wear certified safety shoes (oil resistant and non-slippery) Wear suitable clothing (do not wear loose clothing or dangling jewelry)
What is the 3 point contact rule?
Most ladder injuries occur when getting on or off a ladder To use ladders safely, always maintain three points of contact That means two hands and one foot or two feet and one hand on the ladder at all times Moving quickly often results in only 2-point contact
Who has the right of way in warehouse?
OSHA states the pedestrian has the right of way; therefore, operators must be on constant alert The forklift operator is required to slow down and sound their horn at doorways, intersections, blind spots and when entering or exiting a building
When should repairs be made on a forklift?
The more you use your forklift, the more often you should have it serviced by a factory trained technician A forklift that gets heavy use might require a forklift maintenance visit every 90 days
What is the first step to ensure safe operation of your pit at the start of every shift?
PITs must be inspected at the beginning of each shift to ensure they are safe to operate These inspections may be performed by authorized PIT operators as long as they are trained on how to properly inspect the PIT
What does cradling the load mean?
42 True or False: “Cradling the load” means that you must verify that multi-tiered loads are strapped together
When should an operator tilt the load back on the mast?
The mast must be carefully tilted backward to stabilize the load Ensure the load is secured before moving Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack
When traveling up or down an incline on a forklift?
When traveling with a load, the load should point up the incline, regardless of direction of travel Going up the incline: Drive forward Forks pointed upgrade
What is the 4 to 1 rule when using a ladder?
The base of the ladder should be placed so that it is one foot away from the building for every four feet of hight to where the ladder rests against the building This is known as the 4 to 1 rule
What is the minimum height for fall protection?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations
What does protect your 3 points mean?
Three points of contact means you’re using two hands and one foot, or one hand and two feet, to support your body while mounting or dismounting a vehicle, stable platform or ladder The three points of contact should be broken only after your reach your destination (the ground, vehicle cab, stable platform, etc)
What does PIT stand for in a warehouse?
Take a look around you There’s a good chance you work at a facility that uses a Powered Industrial Truck (PIT) OSHA defines a PIT as “any mobile power-propelled truck used to carry, push, pull, lift, stack or tier materials” Most people think of PITs as forklifts
What is the most common forklift accident?
The most common type of lift truck accident is one of the most fatal: being crushed by a lift truck The Centers for Disease Control and Prevention (CDC) says that most fatal lift truck accidents happen when a worker is crushed by a forklift overturns or falls from a loading dock
What is a safe speed for a forklift?
The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present
How often should a forklift be inspected?
Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock You will find this requirement in the Powered Industrial Truck standard at 1910178(q)(7) OSHA does not require that forklift inspections be documented
When should a daily maintenance check be done on your forklift?
Forklifts should be inspected each day before use and operators can perform these simple, daily checks We’re aware that these checks may seem silly to operators, but in reality, the checks take about 3 minutes (if that) to perform and result in a safer operating environment and lower maintenance costs
When should I change my forklift oil?
Forklifts items that should be serviced every 250 hours: a fuel filter oil change and filterEvery 1000 hours change: Hydraulic Oil and Filter Oil and Filter in Transmission and Converter Lube in Drive Hubs Brake Fluid
When setting a load What should you do first?
When setting a load, what should you do first?Place the tasks for lifting a loaf in their proper order Level the forks and set the forks for proper width Position the load on the forks Lift the load straight up Tilt the load back slightly Back up
What is the first thing to do before driving a forklift into a trailer?
Before driving your forklift into a trailer, you should chock the trailer wheels, support the nose of the trailer, inspect the dock plate, and check the trailer floor (all of these)
What steps must be done daily before using a forklift?
Check fluid levels (oil, water, and hydraulic fluid, for example) Check for leaks, cracks and visible defects everywhere on the forklift Check mast chains visually; avoid the use of hands
What is cradling in lacrosse?
Fundamentals of Cradling a Lacrosse Ball To prevent losing the ball in lacrosse, the act of cradling helps lacrosse players retain the ball while moving and or being checked by a defender
What is the meaning of cradling in English?
transitive verb 1a : to place or keep in or as if in a cradle b : shelter, rear c : to support protectively or intimately cradling the injured man’s head in her arms 2 : to cut (grain) with a cradle scythe
What is the correct position when picking up a load?
Do not attempt to lift by bending forward Bend your hips and knees to squat down to your load, keep it close to your body, and straighten your legs to lift Never lift a heavy object above shoulder level Avoid turning or twisting your body while lifting or holding a heavy object