The PTO (or power take-off) belt is part of a pulley system that operates the blades on your riding lawn mower It runs off the electric clutch system in your engine
What are the two belts on a riding lawn mower?
There are two belts on most riding lawnmowers One belt connects the transmission of the lawn tractor to the driveshaft pulley and the other belt connects the mower deck to the driveshaft pulley
What does PTO mean on a mower?
A power take-off or power takeoff (PTO) is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application such as an attached implement or separate machine
What is the difference between a drive belt and a deck belt?
So, with the mower deck removed from the tractor, the “drive belt” would be the one still on the tractor The mower deck itself will still have the internal “deck belt” which if you turn one blade by hand, all blades turn because that deck belt is what connects and drives all the blades together
Do you have to remove mower deck to replace belt?
To replace this belt, the deck should be off the lawn mower To remove the front of the belt from the engine pulley, you may have to remove the cap screw from the center of the pulley and PTO to the engine crankshaft
Do riding lawn mowers have PTO?
The PTO is a switch or lever found on tractors and mowers and stands for Power Take Off This can be an electric switch or mechanical engagement that takes engine power to operate the mower deck or an implement
What does PTO mean on a zero turn mower?
The power take off (PTO) clutch in your lawnmower is the drive pulley that transfers the power of the engine to the blade
Do lawn tractors have PTO?
Many models of John Deere riding mowers, lawn tractors and garden tractors are equipped with a power takeoff (PTO) function that the operator uses to engage the mower blades of the machine The PTO consists of many parts, one of which is the PTO pulley
How do you change a PTO belt on a Troy Bilt riding lawn mower?
Instructions Turn the mower off and make sure the engine is cool Put the deck height lever at its lowest position Remove belt keepers from around the engine pulley Remove belt from engine pulley Remove quick link from the front of the mower deck Remove the left and right hanger brackets
Why does my Cub Cadet keep shutting off?
The carburetor might be clogged A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time This sticky fuel can clog up the carburetor and cause the engine to stall If the carburetor is clogged, try cleaning it with carburetor cleaner
What size belt does a Cub Cadet?
Cub Cadet Lawn & Garden Tractor Belts Model OEM Part Application – Dimensions 1210 754-3026 38″ Drive Belt (1/2″x60″) 1210 754-3026 Drive Belt 38″(1/2″x60″) 1211 754-3026 38″ Drive Belt (1/2″x60″) 1211 754-3026 Drive Belt 38″(1/2″x60″)
How often replace mower deck belt?
You shouldn’t need to replace belts every year, or more in one year A common cause of belt breakage is excessive grass clippings on the deck Grass clippings can work their way under pulleys and deck covers, causing series problems
How much does it cost to replace a drive belt?
The average cost for a drive belt tensioner replacement is between $211 and $239 Labor costs are between $73 and $93, while parts are priced between $138 and $146 Taxes and fees are not included in the estimate
How do I know if my lawn mower belt is bad?
The Symptoms of a Frayed Lawn Mower Belt Squealing Like a Pig If the edges of the belt are frayed, it may emit a loud squealing or screeching noise as it travels through the various pulleys Falling Right Off Fraying accompanies wear and tear, so frayed lawn mower belts are often loose Sapping Your Power
What is a deck belt on a lawn mower?
The deck belt on your riding lawn mower connects the crank shaft to the lawn mower blades, causing them to turn Lower the deck height to the lowest position, lowering the mower deck onto the blocks Depending on the model, your lawn mower will have either a lever engagement or PTO engagement
How do I know if my PTO clutch is bad?
Activate the PTO engagement lever, then disengage it Turn it on and off several times If you do not hear a disengagement noise or see the power takeoff pulley stopping or slowing down at any time, it indicates the clutch and plates have galled together from excessive heat, or the slip ring has jammed
What is PTO clutch?
Power take-off (PTO) clutches provide a mechanical disconnect between the power created by gas and diesel engines or electric motors to another piece of equipment The PTO clutches enable the transmission of that energy to auxiliary equipment that does not generate its own power
What is manual PTO?
my understanding of the difference is, a manual PTO is one that runs right off a shaft on the engine eg, the 110/112 RF tractors have a manual PTO, its a massive pulley on the NON-flywheel side of the engine, with a mechanical clutch to engage and disengage it
What does a clutch do on a riding lawn mower?
An electric lawnmower clutch, commonly called a power takeoff clutch (PTO), is the part of a lawnmower or riding tractor responsible for engaging the blade The electric clutch helps to transfer engine power to the drive train The clutch connects two drive shafts and is controlled by a toggle switch
What is a PTO switch on John Deere?
The PTO is the mechanism that turns on the blades located under the mower deck The PTO works off of a 12-volt system The electric clutch is operated by a switch located on the dashboard of the lawn mower
How long should a mower drive belt last?
Considering you are mowing 2 to 3 times the lawn of the typical homeowner, or 6 to 9 years worth, yeah, it could be worn Also consider the possible need for drive cable adjustment or engine rpm adjustment
Why does my drive belt keep coming off my riding mower?
The drive belt may come off a riding mower because it is damaged or loose If broken or worn, the belt can break while the engine runs, and it can fly off at a great velocity, which is highly dangerous Check the belt for looseness, cracks, fraying or separation from the rest of the assembly, and replace if necessary
What size belt do I need for my Craftsman riding mower?
AYP / Craftsman / Sears Drive Belt No AYP / Craftsman / Sears Drive Belt fits 42″ mowers, 12-18 HP Size: 1/2″ x 92-1/4″ Replaces part numbers 532130969 and 130969