General Frequency stability Less than ±05ppm (–10˚C to +60˚C; 14˚F to 140˚F) Frequency resolution 1Hz Dimensions 240×94×238mm; 945×37×937in (projections not included) Weight (approximately) 42kg; 926 lb
What bands does the ICOM 7300 cover?
General Frequency coverage Transmit [2] 18000 ~ 19999 MHz 35000 ~ 39999 MHz 52550 ~ 54050 MHz [3] 70000 ~ 73000 MHz 101000 ~ 101500 MHz 140000 ~ 143500 MHz 180680 ~ 181680 MHz 210000 ~ 214500 MHz 248900 ~ 249900 MHz 280000 ~ 297000 MHz 500000 ~ 540000 MHz 700000 ~ 705000 MHz Mode
Does the IC-7300 have Dstar?
Using the IC-9700 and IC-7300 creates the ultimate, compact radio station covering the VHF, UHF, HF and 1200 MHz bands The IC-9700 is the only VHF/UHF all mode transceiver that enables a variety of VHF/UHF operation including DX, contests, satellite/EME and D-STAR
What does IC-7300 include?
The Icom IC-7300 features a RF direct sampling system, 15 discrete band-pass filters, a real-time spectrum scope and a large 43″ color touch screen display Additional features of the IC-7300 include a built-in automatic antenna tuner, 101 channels, SD memory card slot and 3 CW functions
What frequencies does the ICOM 7300 have?
Tuner Frequency range 19–70MHz bands Matching impedance range 167Ω–150Ω unbalanced (VSWR better than 1: 3) Tuning accuracy VSWR 1: 15 or less Tuning time 2–3 seconds (Maximum 15 seconds)
Does ICOM 7300 need power supply?
Answer: You need to purchase an external power supply I use the TekPower TP50SW 50 Amp 138V Analog Power Supply It works nicely with the IC-7300
What size power supply do I need for an ICOM 7300?
General Number of channels 101 (99 regular, 2 scan edges) Antenna connector SO-239 (50Ω) Power supply requirement 138V DC ±15% Power Consumption Tx: 21A (at 100W output power) Rx: 09A typical (Standby), 125A (Maximum audio)
Where is the ICOM 7300 made?
ICOM IC7300 – still made in Japan
Is the IC-7300 a good radio?
50 out of 5 stars WOW, this is better than sliced bread! The IC-7300 is the radio to look at when you are in the market for an HF radio This radio is a game changer in the ham radio market I have radios at twice the cost that don’t have the sensitivity, rejection and ease of use
What is IP+ on ICOM 7300?
The IC-7300 employs an RF direct sampling system, where RF signals are directly converted to digital data The new “IP+” improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal
Does the IC 7300 have Bluetooth?
It is possible however to add a very small Bluetooth transmitter to the 35mm headphone jack and then use a pair of Bluetooth headphones around the shack
What is FT8 digital mode?
The FT8 digital mode is the latest in a series of weak signal applications for amateur radio Conceived originally for enhancing esoteric propagaint modes such as high speed meteor scatter and moonbounce, Joe Taylor (K1JT) developed a series of applications including FSK144, JT6M, JT65, and JT9
What is the best power supply for a ICOM 7300?
Power Supply for Icom IC-7300 The Icom PS-126 switching power supply provides 138 VDC ± 5%, at 25 Amps The input voltage is 120 VAC (85-135 VAC) The PS-126 may be configured as a tall or short power supply based on how the rubber feet are attached
Where are Astron power supplies made?
Since 1976, Astron Corporation has been a premier manufacturer of Linear Power Supplies Made in the USA, our Linear Power Supplies have reliably served Commercial and Ham operators alike for over forty years
What is warranty of ICOM 7300?
EXTENDED 1 YEAR WARRANTY FOR IC-7300 The buyer selects a coverage period of one (1) or two (2) additional years The limitations, exceptions, and exclusions of the original manufacturer’s warranty apply during the extension period
When did the ICOM IC-7300 come out?
Icom America announces the new IC-7300 HF amateur radio The radio was introduced at the Tokyo Hamfair 2015 and includes a high-resolution real-time spectrum scope, intuitive interface and a RF direct sampling system &emdash; an amateur radio first (as researched by Icom among major manufacturers)
When did the IC-7300 come out?
In a japanese press release dated just a few hours ago, Icom finally published the official release date and the recommended price The IC-7300 should be available by January 16th 2016 at a price of 139,800yen + tax, wich equates to US$ 1,134+tax or EUR 1,047+tax (expect VAT on top of that)
Is the ICOM 7300 Portable?
What I like about the Icom 7300 for operating portable is it’s size It’s a good fit for the small dinette table It is also easy to operate using the LCD touchscreen I can operate CW, RTTY, PSK31 and FT8 easily with this little transceiver
Is ICOM a good brand?
Icom is synonymous with quality, durability, and dependability For over 65 years, Icom has been the leader in innovation and reliability in the two-way radio market For the third year in a row, the M605 took home the NMEA Product of Excellence award for best VHF Marine radio
What does DX stand for in ham radio?
DX is shorthand for “distance” DXing is the pursuit of distant stations with the goal of earning various DXCC Awards A DXpedition is a trip to operate in a rare DXCC entity
How do I run FT8?
To use FT8 you need four things: An HF transceiver with data or SSB capability An audio interface, a way to get receive audio from the radio into a computer and audio output of the computer into the radio, typically a sound card interface A computer capable of running the FT8 software and time synchronization
When was FT8 invented?
FT8 was introduced in July 2017 with version 18 of the software package WSJT-X [1, 2]
How long is ICOM warranty?
There is a one (1) year warranty on Icom America Systems products and all accessories Land mobile customers have the option to purchase extended warranties at the time of purchase and up to 60 days following their purchase for periods of one (1), two (2), or three (3) years