The MTD Shift On The Go lawn tractor transmission, also called Transmatic, is a simple design that combines a single-speed transaxle with forward and reverse gears and a variable-speed belt drive Place the shifter in Neutral, the speed control in Park, and push the clutch/brake all the way down
How do you shift a riding lawn mower?
If you need to change gears while mowing, you do not have to disengage the blades Simply push the brake and clutch pedal, shift to your new desired gear, and release the brake and clutch pedal Always wear long pants, safety glasses and hearing protection when operating a riding lawn mower to prevent bodily injury
Do riding lawn mowers have a clutch?
Power takeoff (PTO) clutches are found on riding lawn mowers These clutches exist on the bottom of the mower’s engine assembly and control the flow of power to the mower’s cutting blades A failing PTO clutch will result in blades that either don’t engage or will not properly disengage following use
Are hydrostatic mowers better?
Hydrostatic lawn mowers typically offer more power and greater acceleration in a smaller package Their maneuverability and response time is quicker than gear- or belt-driven mowers, allowing users to easily change direction and speeds
Why won’t my riding mower go forward or reverse?
A blocked fuel filter can keep gasoline from flowing to your mower’s engine in adequate supply, resulting in a lawn mower that isn’t drivable Damaged or clogged air filters also can prevent your lawn mower from going forward or in reverse simply because the engine will overheat quickly
What is an automatic riding mower?
Riding Mower Transmissions An automatic transmission performs much like the transmission in a car — you control speed with the gas pedal Easily changing the speed can be useful if you need to slow down often to work around obstacles This transmission offers a smoother ride, requires less maintenance and lasts longer
Can you shift gears on a tractor while moving?
A manual transmission in a tractor, you don’t have synchronized gears, so you’re never shifting when you’re on the move If you shift while you’re rolling you can grind gears, then shift forks, a lot of bad stuff that can do expensive damage to the transmission of your tractor and it’s best to just avoid that
What are the controls on a tractor?
There are three common types of control devices used on tractors: Foot Controls—Pedals Hand Controls—Levers, Toggles, Switches, Knobs, and Buttons Combination Hand and Foot—Engine Throttles
What is the shift pattern on a 18 speed transmission?
The 18 speed transmission is laid out in an ‘H’ pattern The easiest way to become familiar with the 18 speed is to practice shifting in an H pattern The driver uses second, third, fourth, and fifth, then splits up into high range Then, shift the H pattern again for sixth, seventh, eighth and ninth gear
Do hydrostatic transmissions wear out?
The hydro has relief valves, so you cant work it past its designed intent, but you certainly can damage them if you try, just like a gear transmission You can stress it by being rough with it, but really, these last every bit as long as gear transmissions
Does a riding lawn mower have a transmission?
Three primary transmission systems are used in riding mowers and the various classes of mowing tractors Mower decks are designed to operate at a constant speed – typically full engine speed This means adjustments in vehicle speed have to come from the transmission, not by varying the engine speed
What oil goes in hydrostatic gearbox?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility
Where is the choke on a riding lawn mower?
Pull the Throttle onto Choke Position You’ll normally find it on the left side of your riding lawn mower They’re easy to identify, thanks to their labeling picture of a rabbit and turtle Move its lever in order to engage the choke
How do I know if my PTO clutch is bad?
Activate the PTO engagement lever, then disengage it Turn it on and off several times If you do not hear a disengagement noise or see the power takeoff pulley stopping or slowing down at any time, it indicates the clutch and plates have galled together from excessive heat, or the slip ring has jammed
Do lawn mowers have gears?
Transmission Types The gears are manually selected using a lever and clutch Users report a responsive, more immediate feeling of power Hydrostatic Tranmissions (also known as automatic transmissions) use hydraulic fluid to shift gears automatically These are the most common type of transmission on the market
Should my PTO clutch spin freely?
Should my PTO clutch spin freely? Yes, the clutch pulley should turn freely when not engaged It may have an electrical issue as well as bearing issue causing it to stall with no load and vibrate under a load
Which is better hydrostatic or shuttle shift?
Hydro is more costly to purchase and it also has costs to maintain with fluid & filter changes Shuttle shift makes a gear tractor easier to use for back and forth, but just like a hydro, there are parts and components that can just as easily fail or wear
What are the disadvantages of hydrostatic transmission?
The Disadvantages of Hydrostatic Transmission Overly Responsive Vehicles with a hydrostatic transmission have to be driven with extreme care when it comes to acceleration and gears Inefficient HST is not known for engine efficiency Expensive HST vehicles are oil guzzlers
Does a hydrostatic transmission have a clutch?
What you do get with a hydrostatic transmission is infinitely variable control over ground speed with directional changes a simple hand or foot control motion away With a hydrostatic transmission there is no clutch, only a neutral (center) position that is used to start the tractor and idle
How do I know if my lawnmower transmission is bad?
To check the transmission, carefully watch the transmission when the engine is running If the pulley is spinning, and the wheels aren’t turning, the transmission is bad Unfortunately, if this is broken, it may be time to buy a new mower because this part is generally unreplaceable
Why will my Craftsman mower not go forward or reverse?
Sounds like the brake may have stuck It’s on the side of the transmission Could also be that the belt jumped off a pulley and got stuck under it
Why is my hydrostatic mower not moving?
A hydrostatic mower may not move because of a bad drive belt; bad tensioner pulley; broke tensioner spring; old or low hydraulic fluid; hot hydraulic fluid; air in the hydraulic system; or the drive release handles are in the “released” position