How much does it cost to shock a well? If you hire a company to do it, it can cost anywhere around $100 depending on where you live Doing it yourself will only cost as much as the chlorine, 10 gallon bucket and the safety supplies to do it
How much does shocking a well cost?
To disinfect your well and eliminate the bacteria, you should chlorinate the well You can hire a company that services wells to do the chlorinating The cost ranges from $80 – $200 You can also perform the task yourself
Is shocking a well Necessary?
Shock chlorination is a method of disinfecting a water well It is recommended when a water system is contaminated with bacteria Contamination can occur when the well is installed, when repairs are made to the pump or plumbing, or when rainfall runoff enters the well
How long does shocking a well last?
FLUSH AND FINISH: Turn the pump circuit breaker off, return the well cap or put the cover back in place Allow chlorinated water to remain in the system for 12 to 24 hours
Can I shock my own well?
You can shock chlorinate your own well or you can hire a licensed water well driller to do the procedure If you notice a build-up of slime inside your toilet tank, staining of fixtures and laundry, bad taste and a rotten- egg smell, or if your well is producing less water, you may have a condition called biofouling
How often do I need to shock my well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem
How much does it cost to have well water treated?
The average water treatment system price range is between $2,100 and $3,300 nationally, with most homeowners paying around $2,500 for a reverse osmosis system with a sediment filter installed for the entire house
How long does it take for water to clear after shocking a well?
It will usually take 4 to 8 hours to flush the well after a standard well chlorination The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing Caution: The chlorine must be completely flushed from plumbing system
Will Shocking well get rid of sulfur smell?
1 Shock your well with chlorine bleach or hydrogen peroxide to get temporary relief from sulfur odors Often keeps odors away for 1 – 2 months
How do I find out how deep my well is?
If you cannot see the top of water in your well then you can tie a fishing float or “bobber” to your string and lower it carefully into the well until it stops dropping Mark the string at ground level Measure that string length – that’s the depth from the ground surface to the top of your well water
How long does water stay brown after shock?
That is the brown you see Flushing the well by running the hoses for at least 12 hours or upto several day will clear up the problem Don’t panic, it is completely normal
How much bleach is needed to shock a well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon) Do not use excessive amounts of bleach – more is not more effective
Can I pour bleach down my well?
Mix 2 quarts bleach in 10 gallons of water; pour into well Connect a garden hose to a nearby faucet and wash down the inside of the well Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one Pour it into the well without pumping
Can I put chlorine tablets in my well?
Pool chlorine tablets can be used in wells Ground wells require maintenance just as other household components and one of the most important tasks is disinfecting it Disinfecting a ground well involves adding chlorine which kills bacteria and microscopic organisms living in the water
What is a natural way to clean well water?
Liquid chlorine in the form of household bleach and food grade white vinegar can be used to disinfect your well When chlorine is added to water the pH level will rise Food grade white vinegar is used to lower the water’s pH level so the chlorine will work effectively
Can I pour hydrogen peroxide in my well?
From time to time, it may be desirable to use hydrogen peroxide to decontaminate the entire well because some of the odor-causing bacteria also produce sulfuric acid, which will corrode the pump in the long run Some of the iron bacteria can also produce a musty, fishy or oily smell in the water
Should you put Clorox in your well?
Disinfecting Your Water You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand The chlorine in the bleach kills bacteria Note that it may take more than one chlorination for your well to return a satisfactory test To disinfect your well follow this procedure
How much should a whole house water filtration system cost?
How Much Does a Water Filtration System Cost? – Price Estimates Type Price Range Whole House Water Filter System Usually systems cost between $300 to $1,000 and more Reverse Osmosis $150 – $500 Under Sink $50 – $400 Countertop $50 – $120
How long after bleaching a well can you drink the water?
Step 6 WAIT at least 12 hours before turning faucets back on Do not drink, cook, bathe, or wash with water from your faucets during this time because it has high amounts of chlorine in it
Why does my well water turn brown when I add bleach?
The brown is the iron in the water that has oxidized as a result of the chlorination Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown
What is well disinfection?
Well disinfection can eliminate or reduce many different kinds harmful bacteria and viruses as well as harmless bacteria which can cause unpleasant taste and odors However, disinfection will not correct water problems caused by chemical contamination from nitrate, fuels, pesticides, or other substances