Alive or dead, FritzZyme® is non-toxic and completely safe It will not harm fish or invertebrates, even if accidentally overdosed
Can you overdose Fritz complete?
DO NOT OVERDOSE A sulfur odor is normal and dissipates rapidly after use In certain rare conditions and in low oxygen environments this product may reduce dissolved oxygen levels; ensure there is adequate circulation/aeration before adding
How long does Fritz 7 take to work?
I have used Fritzzyme 7 to jump-start my fish tanks and koi pond and they work great, give or take 1 to 4 days along with a water test kit
How do you use Fritz complete?
Use 1 tsp (5 ml) per 50 US gallons (189 L) For smaller volumes, use two drops per gallon For best results, add Fritz Complete to tap water in a separate container before adding water to aquarium Make sure that there is plenty of water flow or aeration when dosing
Should I add more nitrifying bacteria?
Adding the nitrifying bacteria at the beginning gives them the best chance for success because they are not inhibited by high concentrations of ammonia or nitrite Monitor ammonia and nitrite, and you’ll see they stay out of the toxic range, and after a few days you can start to increase the numbers of fish
What does seachem safe do?
Safe™ is the complete and super-concentrated dry conditioner for both fresh and salt water Safe™ removes chlorine, chloramine and detoxifies ammonia, nitrite, and nitrate Use at start-up and whenever adding or replacing water When transporting or quarantining fish, use Seachem StressGuard™
Can you overdose FritzZyme 7?
Alive or dead, FritzZyme® is non-toxic and completely safe It will not harm fish or invertebrates, even if accidentally overdosed
Where does nitrifying bacteria live in an aquarium?
Nitrifying bacteria cells grow on all surfaces of the biological filter media and, in fact, on all wet surfaces of the system, such as the insides of pipes, tank walls, etc
How do you use Fritz Zyme 9?
Dosage / Instructions: For a new system, dose 4oz (119 ml / ½ cup) per 5 US gallons (19 L) For a large livestock system, new system dosage may be safely increased up to 10x For established systems, use 2 oz (60 ml / ¼ cup) per 5 US gallons (19 L)
How do you use a Fritz Turbo Start 900?
Shake bottle of TurboStart, add 1 oz (29 ml) per 25 gallons of water Add animals after acclimating, OR, if fishless cycling, add an ammonia source of choice at the product’s recommended dosage Test water parameters daily and monitor progress of ammonia and nitrite reduction
How do you use a TurboStart 700?
Dosage / Instructions: Turn off UV sterilizers before use, and for 5 days after each introduction of Turbo Start 700 Shake bottle, add 1 oz (29 ml) Turbo Start per 40 gallons (151 L) of water Add animals after acclimating
Can you put too much beneficial bacteria in a tank?
You can’t add too much good bacteria to a fish tank The beneficial bacteria will feed on the amount of ammonia available for it If there are more bacteria than food, the extra bacteria will die or become dormant
Is it possible to add too much beneficial bacteria?
Plants and fish will generally be safe if too much beneficial bacteria is added Trouble occurs when there is a lot of organic buildups, numerous beneficial bacteria, and inadequate aeration Like fish and other aquatic organisms, good bacteria need oxygen
Can you do too many water changes in an aquarium?
To conclude, yes you can do too many water changes If you do more than 1 water change per day, your fish will experience unnecessary stress This is because the water parameters are fluctuating Never change more that 50% of the water at once, as this can kill the beneficial bacteria in the aquarium
How long does it take for Fritz Turbo start to work?
TurboStart® 900 reduces fish loss due to toxic levels of ammonia and nitrite Establishing colonies of nitrifying bacteria without FritzZyme® can take weeks; FritzZyme® TurboStart® completely cycles aquariums in five days or less, allowing for safe, immediate addition of livestock
How do you use stress Zyme?
Directions For Use Shake well before using For regular maintenance: Add 1 tsp per 10 gallons of water weekly For new aquariums: On the 1st, 7th, and 14th days add 2 teaspoonfuls (10 ml) for every 10 US gallons (40 L) of aquarium water
What is good bacteria in aquarium?
All fish tanks need a good biological filter to help maintain water quality for healthy fish, and beneficial bacteria are a key part of biological filtration Two types of bacteria are necessary – Nitrosomonas species and Nitrobacter species Both of these types of bacteria are critical parts of the nitrogen cycle
Can you use too much seachem safe?
FAQ: Is it possible to overdose Seachem Prime®? Prime® is very safe and quite difficult to overdose to the point of harming tank inhabitants, but a large enough overdose can start to deplete the system of oxygen
How long does it take for seachem stability to work?
I used this to help cycle a new tank, and it worked well It still took 2-3 weeks to fully cycle The directions say there’s no need to add more stability after seven days, but I kept adding the maintenance dose daily until cycling was complete
What is better prime or safe?
Value Seachem Safe has a massive advantage over Seachem Prime in terms of value Because Safe is a dry conditioner, Seachem can pack more of the more concentrated formula into a smaller package As a result, a small 250 grams container of Safe can treat 50% more water volume than a 4 liter bottle of Prime
Can you overdose ATM colony?
There is no risk in overdosing Colony nor Outbreak! Always have air bubbling! All nitrifying bacteria, including Colony, are aerobic so the more oxygen the better they work If oxygen depletes, they start struggling and working slower
Can I add API quick start with fish in tank?
Yes, you may add your fish to your aquarium immediately after dosing with API QUICK START nitrifying bacteria
How do you use microbacterium?
Stable, Low-nutrient Systems: To maintain a low concentration of available nutrients in all marine and freshwater aquaria, 5 ml (1 capful) of MicroBacter7 per 50 US-gallons (1893 L) [˜2 drops per gallon (38 L)] of aquarium water no more than once each week; alternately, add 1 drop per 50 US-gallons daily (or 1 drop