Can you add a second collar to PetSafe wireless?
Yes There is no limit to the number of pets you can contain with the containment system It’s as simple as purchasing an additional (compatible) receiver collar for each pet You can purchase additional receiver collars online or contact our Customer Care Centre
How do you pair a new PetSafe collar?
Pair dog one Press and hold the power button on the collar for five seconds The light will turn solid green, then begin to flash and beep Release the button Press and hold the yellow button on your remote
Do all PetSafe collars work together?
Important: All PetSafe® In-Ground Fence™ collars are compatible with all PetSafe® In-Ground Fence systems except for the UltraSmart® and YardMax® systems Locate the model number on the collar The model number on the collar should match one of the model numbers on the chart
How do I extend the range on my PetSafe wireless fence?
It Is Simple To Expand The Containment Area With The Purchase Of Additional Transmitters By Overlapping The Boundaries You Can Use Another Wireless Transmitter With Overlapping Boundaries Of At Least 5-10 Feet To Increase The Size Of The Pet Area
Will premier pet collar work with PetSafe?
Our wireless collars and PetSafe wireless collars are cross-compatible, so you could absolutely use one of our wireless collars with a PetSafe wireless system
How do I reset my petsafe wireless collar?
Press and hold the button on the collar until a beep is heard and the light flashes green to turn the collar on Press and hold the power button for 10 seconds to reset the collar The light turns red and the collar turns off Continue holding the button
Is PetSafe owned by Invisible Fence?
Radio Systems Corporation, makers of the PetSafe®, SportDOG® and Invisible Fence® brands, has acquired Premier® Pet Products “Radio Systems has undeniable strength in electronics and new product development
Can I add a collar to my Invisible Fence?
The short answer is yes, many dog fence collar receivers are interchangeable
How long do Invisible Fence collars last?
Invisible Fence® Brand Computer Collar® units are powered by a specially designed 3-Volt Lithium Power Cap® battery that Canine Company recommends replacing every 3 months to ensure continuous and trouble-free operation of your dog’s Computer Collar
How far does a PetSafe wireless fence go?
The maximum range is at least 90 ft on any of the PetSafe® Wireless Fence systems It is recommended that you place the 2 transmitters no more than 150 ft apart
How do I increase the shock on my PetSafe collar?
Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous flashes The Static Correction Levels increase from 1 to 5 Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1
How long do PetSafe wireless transmitters last?
How long do PetSafe wireless transmitters last? The Wireless Containment System unit can last up to approximately 10 years or more if used properly Batteries on the collar can last and be replaced up to 1 to 2 months
Are PetSafe collars compatible with Innotek?
Answer: Thank you for your question! Innotek and PetSafe systems use different frequencies and are not cross-compatible with one another For more information on obtaining a compatible receiver collar, please contact PetSafe directly
What collars work with boundary plus?
Invisible Fence® MicroLite® Plus Computer Collar® is 30% smaller and lighter than the standard Classic Computer Collar® Highly customizable for multiple dog environments – plus it’s packed with more technology than any other collar on the market today Compatible with Boundary Plus equipment and system
Is Innotek and PetSafe the same company?
Innotek is now part of the PetSafe family!
Why is PetSafe collar blinking red?
Charging too often can reduce battery life Charge your receiver collar when the receiver indicator light blinks red The system works by sending a radio signal through a buried wire (boundary wire) Your pet wears a receiver collar that picks up the signal
How long do PetSafe rechargeable collars last?
Use this collar for dogs that weigh 5 pounds or more and who have a neck size between 6-28 inches The Stay & Play Wireless Fence collar comes with a built-in rechargeable battery and a low battery indicator The collar quickly charges in just 2-3 hours and lasts up to 3 weeks depending on frequency of use
Why is my PetSafe collar beeping but not shocking?
Touch both points on the collar while it is ticking or beeping If you do not feel a shock, then there may be a problem with the receiver collar Make sure you touch both points on the receiver at the same time when you hear the collar beeping It will tell you definitively that the fence is or is not working
How do I connect my petsafe collar to my phone?
With the collar powered on, press and hold the button on the collar for two seconds to reconnect Bluetooth With Bluetooth reconnected, the collar will automatically reconnect to the app
How do you reset a dog collar?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times You may need to hold both units 2-3 feet from each other before this occurs Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal
How do I know if my PetSafe collar is working?
All you have to do is hold the tool against the contact points on your dog or cat’s receiver collar to check if the collar is working properly The test light tool will light up if static correction is being activated
How do you unlock the petsafe collar?
To unlock, press and hold both the up and down buttons on the left simultaneously 6 If your pet continues to show no response at Level 15, check the fit of the training collar See “Fit the Training Collar” You might also want to test it on your hand at a lower level to ensure the collar is working
Where is PetSafe manufactured?
The Pet Safe company headquarters is in Knoxville, TN However, most pet products and toys made today come from China
Who is PetSafe owned by?
Our parent company, Radio Systems Corporation, owns many of the most recognizable pet brands in the world
Where is PetSafe located?
Headquarters moved in Knoxville, TN to our current PetSafe® Way location