Reset computer for a new trip To reset the trip time, distance and average speed hold F for 3 seconds Setting wheel size 1) Press M till you see the ODO mode in the display 2) Hold down F for three (3) seconds The current setting for wheel #1 will be displayed
How do I turn off my specialized speedzone sport?
There’s no way to turn it off That wouldn’t be a problem for a wired speedometer, or if you *never* take it off the bike But when not on the bike, this wireless version will think it’s moving at an arbitrary speed between
How do I set up speedzone sport?
Setting the Clock To enter the clock mode, press and hold the “MODE” button for three seconds The time will now be displayed on your Speedzone To set the clock press and hold the “FUNCTION” button for three seconds The display will flash either twelve (12:) or twenty-four (24:)
Why is my bike computer not working?
The most common problems are fairly easy to fix There are three basic causes of the vast majority of cyclecomputer malfunctions: Battery problems, wiring problems, and misalignment between the magnet and the sensor
How do you reset specialized TCD?
Switch on the bike, then switch on the display (but don’t connect to the Mission Control app), then wait about a minute and press both buttons together for about 2 seconds
How do I calibrate my Specialized bike computer?
Press the “set” button to select, then continue to the second digit by toggling through 0 to 9 using the “mode” button and pressing “set” to select the correct digit Continue until you have set all four digits If you are satisfied with the odometer reading 0000, simply press the “set” button four times
How do you reset a Cateye bike computer?
Resetting Elapsed Time, Trip Distance, Average Speed and Max Speed Press and hold the MODE and START/STOP buttons for 2 sec in either the Elapsed Time, Trip Distance 1, Average Speed or Maximum Speed functions to reset these functions
How do I reset my Cateye fast?
When using the QUICK for the first time, con- figure the initial settings 1 Clear all data Press the AC button on the back of the QUICK * All data is deleted and the QUICK is reset to its factory default settings
What is TCD W?
The Turbo Connect Display (TCD) puts all of your key ride and bike data in one convenient location on the handlebars Some of these metrics include: Speed (current, max, average), distance, riding time, cadence, battery level, rider power, support mode, heart rate, average speed, and a clock
How do I turn Cateye off?
1 Close Cateye Cycling™ or from (MENU), turn off [Connect] 2 From the smartphone search screen, press MODE for 1 second to switch to Sensor Direct Mode
How do I turn off Cateye Micro Wireless?
From the measurement screen, press MENU to switch to the menu screen Measurement screen Press MODE to display the screen shown below, and then press MODE for 2 seconds (2 seconds) Switch off the functions you want to skip by moving to the relevant icon and turning the setting off Press MENU to confirm settings
Does Cateye Quick has backlight?
Its also useable at night-without a backlight function
How do I use Cateye Strada Wireless?
1 Clear all data (initialization) Press the AC button on the back of the computer 2 Select the speed units Select “km/h” or “mph” 3 Enter the tire circumference Enter the front wheel tire circumference of your bicycle in mm 4 Set the clock 2 3 60 cm 5 mm 2 Install the sensor and magnet
Will any magnet work for bike speedometer?
Just strap a magnet on your spoke and see if it works You’re right that any small magnet that’s strong enough and passes close enough will operate the sensor
Can you put a bike computer on the rear wheel?
The short answer is that you can put a bike computer on a rear wheel, but it must be specifically designed to work from that position
How do I pair my mission control app?
– In the Mission Control App settings, select “MY BIKES” and click on the bike or serial number that matches yours You may be asked for a pairing code depending on the bike, but a connection with your bike only needs to be established via the Mission Control App once – With that done, you’re set up for using the app
What is BLEvo?
BLEvo – For Smart Turbo Levo 4+ It is also present the Bike Monitor in order to monitorize the bike data with GPS information The App uses the HealthKit in order to be able to read the heart rate from Apple Watch – The app user is only responsible for any changes made or attempted to make to your e-bike
How do I pair my Specialized bike with the app?
Connect to a new bike Turn on the bike you are connecting to, and select the “+” icon in the upper-right corner of the app This will pull up a list of bikes available Click on the serial number of the bike you wish to connect to If you are asked for a pairing code, enter the 6-digit code that comes with your bike
What does the specialized mission control app do?
Available on both IOS and Android devices, the Specialized Mission Control app effortlessly connects to your Turbo-equipped bike and can work in conjunction with your onboard TCU (Turbo Connect Unit) so you can really get the most out of every ride
What is specialized shuttle mode?
“Shuttle Mode” is targeted toward eMtb riders – normally when a rider is spinning the pedals fast (cadence), the motor backs off because the high cadence is telling the motor you want to do more of the work So when the mode is engaged, the rider gets full motor support at high cadences
Where is pairing code on Turbo Levo?
It’s also on your peel and stick label that should be on the last page of your manual
What is climb response?
Climb Response is a sub-setting of Smart Control based on Remaining Elevation and is used for consistent motor support when riding short, consecutive uphill sections For example, if you set Climb Response to 75ft, then your motor will not adjust its motor output until after you’ve gained more than 75ft of elevation